Thread cutting systems compact, stationary
| Weight | 1.7 kg |
|---|---|
| Working range Ø (mm/inch) | 2.5–24 mm / 0.098–0.787″ |
| Pitch max. (mm/inch) | 2 mm / 13 t.ip.i |
| Chaser holder | see holder tables |
Accessories:
Setting device with dial gauge
| Shank-Ø D mm (inch) |
Length Ls mm | d mm | Internal stop | Max. thread length |
|---|---|---|---|---|
| 15.875 (5/8″) | 30 | 6.4 | – | up to Ø 6: unlimited |
| 16 | 34 | – | yes | up to Ø 10: 51 |
| 19.05 (3/4″) | 34 | – | yes | up to Ø 10: 51 |
| 19.05 (3/4″) | 42 | 13 | – | up to Ø 13: unlimited |
| 20 | 34 | – | yes | up to Ø 10: 51 |
| 20 | 34 | 13 | – | up to Ø 13: unlimited |
| 20 | 50 | – | yes | up to Ø 10: 51 |
| 22 | 42 | 14.2 | – | up to Ø 14: unlimited |
| 25 | 72 | 10.5 | – | up to Ø 10: 51 |
| 25 | 42 | – | yes | up to Ø 10: 51 |
| 25 | 42 | 13 | – | up to Ø 13: unlimited |
| 25.4 (1″) | 50 | 12 | yes | up to Ø 12: 51 |
| 25.4 (1″) | 50 | 12 | – | up to Ø 12: unlimited |
